轮胎喷砂机设备：

Die sandblasting cleaning machine

Tire mould is used to vulcanize various types of tire mould.

Tire mold classification

1. Movable mold, which is composed of pattern ring, mold cover, upper and lower side plates. Metal sandblasting machine movable mold to distinguish the cone - oriented flexible mold and inclined - oriented flexible mold.

Two: two half mold, composed of the upper mold and the lower mold; After a long time of high temperature, the tire mold and rubber long-term contact, in the surface of the tire mold will produce a layer of oxide layer, if not cleared will affect the quality of the tire, so regular cleaning of the tire mold is essential work.

Automatic sandblasting machine accessories tire mold cleaning method: manual with steel wire ball clean sandblasting, with shot peening clean dry ice clean laser clean mold sand blasting process introduction: Tre mold cleaning machine Tre mold cleaning machine Tre mold process Tre mold surface product morphology Cylindered, pattern block cleaning purpose Tre mold surface using abrasive glass sand, stainless steel shot, ceramic sand, resin sand sandblasting pressure 5-6 kg (10m3\min), diameter: less than 1800mm, height: less than 800mm, weight: The surface of the mould of 3000kg products is cleaned and processed by oxide layer. The abrasive glass sand, stainless steel shot and resin sand are used to blast sand at a pressure of 5-6kg. The air source is 10m3\min, and the processing efficiency is 10 pieces \h

Caution: Do not cause damage to the tire surface of the die.

Sand blasting cleaning process description:

Fully automatic punching die equipment, suitable for double and half punching die and movable die surface cleaning.

The sand beater consists of two motor-driven horizontal turntables, each of which is designed to hold a weight of 2T/ half die, a small diameter of 560mm, a large diameter of 1600mm, and a height of 600mm.