Extrusion type automatic sandblasting machine is a kind of automatic moving sandblasting machine specially designed according to the requirements of aluminum profile mold products and processing technology, which is completely suitable for the products provided. According to the requirements of product efficiency, the machine trolley automatically in and out, the rotary plate automatically rotates, a total of 10 general pressure high speed sandblasting gun arranged in the sandblasting area, can be sandblasting processing of the workpiece that needs sandblasting. According to the processing needs, arbitrary adjustment of the spray Angle of the spray gun.

The suction type sandblasting machine is composed of host machine, cyclone separator, dust collector, exhaust pipe, compressed air system (customer provided), electrical system, nozzle, etc. The machine is equipped with 10 high speed general pressure sand gun, 1 blowing sand gun.

Sand blasting process of reflection roller:

Sand blasting is a physical solution to a problem that is difficult to be solved by chemical methods. Adopts compressed air as the power, high speed injection beam, the sand blasting, shot peening glass bead, steel shot, steel grit, quartz sand, emery, iron sand, sea sand) required for high speed injection processing surface of workpiece, make the change mechanical properties on the surface of the workpiece, the workpiece surface due to the abrasive and the impact of cutting effect, make the surface has a certain degree of, Make medium with different surface roughness, thus improving the mechanical properties of the workpiece surface, improve its fatigue performance, the bonding strength increased with the workpiece surface, extend the durability of the coating, and benefit for the flow of the coating and decorative, remove impurities, noise and oxide layer on the surface of the medium at the same time surface become rough, produce residual stress, improve the surface hardness of base material. Erosion machining is a chemical surface treatment method that sometimes affects the appearance of the finished product.