Open the main structure of the mobile sandblasting machine.

The M8 nozzle requires 4 cubic meters of air per minute. 4 square per minute air compressor screw type in about 40,000 yuan, piston type in about 16,000 yuan. The price is much higher than sandblasting machine. Be careful when you buy. If many users buy the air compressor of the sandblasting machine, there is no need to buy the weight of 4 minutes. If you buy air compressor, mainly buy air compressor about 2W.

Sand control valve: there are many types, the most important is the wear resistance, low price of consumables. There is generally wear-resistant rubber in the sand control valve, which can be replaced with wear resistance if damaged. The sand control valve is generally not easy to be damaged. Whether the use of sand control valve is convenient directly affects the efficiency of sandblasting machine. In addition, the sand control valve uses CR12 with high wear resistance. All in all, easy to use and not easy to damage.

Rubber plug: the rubber is cold on the top, its role is to seal the air sandblasting tank upward when the rubber plug is taken in, so that there is high pressure gas in the container, and the gas is released when the sand is added. The rubber plug falls down from the rubber plug and adds sand. Sand blasting machine company rubber cold rubber and iron two kinds.

Notes for equipment maintenance of sand blasting machine in summer:

Maintenance of production equipment in hot weather is also important. Let's talk about summer sandblasting machine maintenance. If any abnormality is found, inspection and maintenance should be stopped immediately.

Heat dissipation of equipment, such as control cabinet. Check whether heat dissipation is normal around, whether there are obstacles around, whether some lines are aging, etc.

The dust collector of the sandblasting machine checks whether the filter of the dust removing element is normal, whether the dust removing element is blocked, and whether the dust removing element is damaged. Replace immediately upon discovery.

Check the sand pipe and pipe, whether the sand pipe is worn and aging, whether the sand pipe joint is loose and other pneumatic parts, whether the pneumatic parts leak, whether the pneumatic parts are loose. Blower, motor inspection, blower, motor overheating, etc.