Ningbo xin zhe machinery equipment co., LTD is a sandblasting surface treatment industry has "brand of professional manufacturers, specializing in the production of all kinds of sandblasting machine manual, automatic sandblasting machine, shot blasting machine, sandblasting, shot blasting machine, a full set of accessories accessories, sandblasting abrasive, abrasive blasting of scientific research, design, manufacturing, sales, in recent years, ningbo xin zhe machinery equipment co., LTD., put forward the high standard, the requirements of the new slogan! The use of extremely rich and leading sales publicity mode, with the constant update of stable quality products, scientific internal management and perfect after-sales service, has been the new and old customers support and praise.
At present, Ningbo Xinzhe Machinery Co., Ltd. Main products are:
Manual sandblasting machine, sandblasting machine series, automatic sandblasting machine, sandblasting machine, water/liquid environmental sandblasting machine, mobile open sandblasting machine, sandblasting machine, derusting caterpillar automatic sandblasting machine, conveyor automatic sandblasting machine, rotating disc automatic sandblasting machine, chain type automatic sandblasting machine, rolling basket of automatic sandblasting machine, sandblasting room and other automation equipment.
Shot blasting machine series: caterpillar type shot blasting machine, hook type shot blasting machine, through the type shot blasting machine, and other various shot blasting line.
Sand blasting machine accessories series: various types of sandblasting gun, all kinds of materials boron carbide nozzle nozzle, double inlet air spray gun/single inlet air spray gun, sandblasting gloves, sandblasting pipe, protective clothing, air control sand valve, Thomson sand valve, pipe wall sandblasting device and various domestic, imported pneumatic, electric components.
Sand blasting abrasive series: glass beads, emery, black corundum, brown corundum, white corundum, black silicon carbide, green silicon carbide, alumina, stainless steel shot, alloy steel shot, aluminum shot, plastic sand resin sand, nylon sand, zirconia sand and other sand blasting abrasive.
Air compressor series: all kinds of domestic and imported air compressors, cold building dryers, gas storage irrigation, precision filters and other similar equipment.
Professional: external sandblasting processing.
Ningbo Xinzhe Mechanical Equipment Co., Ltd. Widely used in machinery, auto parts, locks, electronic clocks and watches, glasses, hardware tools, molds, glass, ceramics, wood carving, stone gravestone carving and hair, plastic products, arts and crafts, medical equipment, heavy industry rust removal, ship anticorrosion, old parts renovation and other industries, Can remove the casting blank, forging, stamping, welding, heat treatment and machining parts of the oxide scale, residue and burr, glass three-dimensional engraving, spray and other processes.
9090 FRP liquid sandblasting machine application field:
Suitable for precision molds, electronic parts cutting tools, piston rings, aviation parts, aluminum alloy, titanium alloy workpiece surface finishing treatment, circular saw blades and oil workpiece single piece, small batch sandblasting processing, etc.
9090 glass fiber reinforced plastic liquid sandblasting machine product characteristics:
1. The body is made of glass steel, durable and corrosion resistant. 2. Adopt the torsion switch to control the machine power supply and control the sand pump and compressed air separately, easy to operate. 3. Compared with the traditional dry sandblasting machine, wet sandblasting machine has no dust pollution and is suitable for precision sandblasting treatment. 4. Sand pump using polyurethane wear-resistant liquid sand pump, mixing uniform sandblasting effect is good.
Type 9090 FRP liquid sandblasting machine
Sandblasting machine must be installed on flat and solid ground, do not need anchor bolts; The machine should be in direct contact with the bottom surface to prevent static electricity. The machine's access power supply is 380V three power supplies, the access line is three four wire, and the total power of the equipment is about 3KW. 2. The working pressure of the air source access equipment shall be 0.6-0.8Mpa, the flow shall be 1.0m3 / min, and the external intake pipe shall not be less than 12MM (the outer diameter shall be 16MM); The air pipe joint can not use stainless steel quick plug joint, this kind of joint inner hole is too small, will lead to insufficient air supply, sand blasting workpiece pressure to drop. Air supply should be dry to avoid damage to machine parts. Three, the use of operation A, first of all, check the equipment inside the triangular bucket there is no residual iron filings or dirty things, clean up; To avoid debris directly into the sand pump to break the impeller. B, water injection water (without sand), pneumatic sand pump, ensure that sand pump running direction is clockwise direction (if not, please change the two wire of the three-phase electric), using the device for the first time after the injection of water, please sand pump start operation more than 10 minutes, remember sand pump must be started in the injected water can run, so as to avoid idling sand pump damage. C, to join the abrasive, open the screen door and hold equipment, directly into the abrasive, abrasive and water mixture ratio of 1:3, the red pu cover for sand pump for the amount of abrasive centre half into the sand, not to add too much, so as not to block sand pump, the height of the water below the weir is 3 cm can (stainless steel liquid sandblasting machine for the first time to join the abrasive is 8-10 kg, Add water at a height of 5CM below the overflow port). D. The operation sequence of the machine is to start the sand pump first. When the sand pump is in normal operation, there will be some water and sand out of the nozzle of the spray gun, and then step on the foot switch to make the sand and water at the nozzle jet out at high speed, so as to carry out good sandblasting work; Foot switch must be isolated from water, so as not to leak electricity, the equipment is not in use must cut off the total power supply. E. Please check whether the abrasive at the bottom is lumped before the equipment is used again. If the abrasive is lumped, it is necessary to wash the abrasive with tap water before starting the machine, so as to avoid excessive load and burn out the sand pump motor. F, abrasive replacement: open the valve at the bottom of the sand pump elbow, use the container to fill the old abrasive, clean the inside of the abrasive, and then close the valve.