What is the industry for manual sandblasting machine?

1, manual sandblasting machine can clean stainless steel welding parts, heat treatment parts, stamping parts and machining parts of the rough surface, remove residual salt and burr, coating, plating before the pretreatment process.

2, manual sandblasting machine can also spray glass balls, strengthen the surface of light decorative parts.

3, manual sandblasting machine is suitable for medium and medium parts single small batch production, high quality and high efficiency.

4, manual sandblasting machine is suitable for watchband factory, glasses factory, jewelry factory, electronics factory, etc.

5, manual sandblasting machine adopts siphon sandblasting, the use of compressed in the sandblasting high-speed flow to form a negative pressure ejecting effect, the grinding liquid in the grinding tank with hose inhaled into the imported sandblasting machine gun, and then compressed air flow from the nozzle high-speed sandblasting to the workpiece surface, to sandblasting processing.

Operation specification of sandblasting machine:

Inspection and preparation before starting the sandblasting machine:

1. Check whether the power cord is firm and securely connected with the socket.

2. Adjust the pressure valve according to the needs of the work, control the compressed air pressure into the spray gun, the working pressure can be selected from 2.8-7bar.

3. According to the processing needs, select the appropriate grinding materials and put them into the storage box at the lower part of the cyclone separator. The grinding materials enter about 5kg at a time.

4. According to the type of abrasive, adjust the position of the intake pipe, so that the end of the intake pipe of the sandblasting machine appears the appropriate length of the intake gap, can control the number of the abrasive intake pipe, the general intake gap is 6-7mm, but also can be determined according to the actual use of reasonable value.

5. Adjustment of the air inlet of the separator Adjust the size of the air inlet to control the storage of the return separator.